6 Tips For Varnishing Wood For The Best Finish In Riverview, FL

Varnishing wood can be one of the best way to enhance its appearance, sometimes even better and more so than painting it, as varnishing it will give it more of a natural wood appearance than any paint color possibly can.

As with all painting projects, there are ways to do it right and ways to do it that are less than ideal, and if you want a well done varnish job, you will probably need to follow the former and not the latter.

It’s just a matter of finding and following the best advice that you can find, some of which you will find right here in this article.

As that is the case, here are six tips for varnishing wood for the best finish in Riverview, FL.

1. Do Not Use Cheap Paintbrushes To Varnish

Though the average homeowner might be tempted to get whatever paintbrush is available on the market at the lowest price to vanish, absolutely resist this urge and instead get a paintbrush that is meant for varnishing.

The cheaper paintbrushes just don’t have the right bristle consistency to properly apply varnish and so what will happen is that you will not apply it well and you will end up having to get a second set of brushes and start the project all over again.

Do yourself a favor and get the right brushes from the beginning.

2. Make Sure The Temperature Is Ideal To Varnish

If the temperature is too cold, you will not do well when you are applying varnish, as it will drastically increase the time that the varnish will dry.

Similarly, if it is too hot, your varnish will dry far too quickly and then it will not have the right opportunity to even out on the surface of that which is being varnished.

What you will need to do instead of either of these is to make sure that the temperature is a good medium, in between sixty-five and eighty to be exact to make sure that your job will go well.

3. Make Sure The Brush Is Not Overloaded

There is a quantity of varnish that should go on the brush and you will know when you have surpassed that quantity.

Make sure you don’t have too much varnish on your paintbrush, or you might slosh some of it onto that which you are varnishing.

4. Stir Varnish, Do Not Shake

Unlike the drinks that James Bond enjoyed, absolutely stir vanish and not shake it as shaking it will introduce bubbles into it and that’s not how you want your varnish to be prior to your applying it.

Stir the varnish gently and do not agitate it.

5. Give Varnish Time To Cure

Once you have finished applying varnish, you need to give it a proper amount of time to dry before you apply the second layer.

Regarding varnish, this means that you should allow it to dry at least overnight and no less — you do not want to try applying that second layer until the first one is dry.

You shouldn’t consider trying to get away with just one layer — the average thing that needs to be varnished should get two layers of varnish.

6. Have Realistic Expectations For How Long It Will Last

As much as we want to think when we varnish something, it will be varnished for life, the average varnished project will need new varnish after a few years — and that’s okay.

When you do, it’s just a matter of stripping and reapplying the varnish!

If you haven’t identified a reliable interior painter yet, our team at American Veteran Painting can help.

To get started, book a FREE estimate below or call us with questions at (813) 520-6096.

Related: Interior Painting Valrico, FL: How to Remove Water Stains From a Ceiling
Tips for Painting Corners and Walls Near A Ceiling in Apollo Beach, FL
6 Mistakes to Avoid When Painting Cabinets in Apollo Beach, FL